[email protected] • (610) 941-4333 • www.safetyhoistcompany.com • 8
Operator’s Manual
EH-500 Electric Material Hoist
HOW TO ASSEMBLE YOUR HOIST
Continued
FIGURE 7
FIGURE 8
FIGURE 9
11. Attach the thimble on the cable to the back of
the carriage using the 1/2 - 13 x 1.5 bolt washer
thimble washer nut.
SEE FIGURE 8.
12. You are now ready to lift the hoist into place
- WARNING: When setting up your hoist please take note
of all overhead obstructions and/or electrical wires. Select
a location that is free of traffic and pedestrians.
13. Lay the assembled hoist alongside the wall where
the hoist is to be used
14. Place hoist against building at the correct angle.
- See chart on page 5 to determine the correct angle
of incline.
15. Attach the power unit to track & pin in-place.
S
EE FIGURE 9.
16. Using the pendant, press the UP button to take
the slack out of the cable.
