[email protected] • (610) 941-4333 • www.safetyhoistcompany.com • 7
Operator’s Manual
EH-500 Electric Material Hoist
HOW TO ASSEMBLE YOUR HOIST
Continued
FIGURE 4
FIGURE 5
FIGURE 6
6. Slide the peak assembly (VH-B) onto the end of
the track
- Secure it with two (2) 3/8” x 3/4” carriage bolts and lock
nuts. The square holes are off-set, the side with the
yellow sticker should be facing up.
SEE FIGURE 5
7. Turn the hoist track over with the carriage on
its side
8. Remove power cord and pendant cord from
storage compartment and attach them to hoist
with quick connect fittings.
-
Attach strain relief hooks on cords to eyelits on hoist.
SEE FIGURE 6.
9. Plug the power unit into a 110v 15-amp GFCI*
electrical supply
10. Unwind enough cable from the electric winch
to go through pulley at the peak and back down
the other side of the track to the carriage by
pressing the down button on the pendant.
SEE FIGURE 7.
