Safety Clamps, Inc.
VL-BC, VBC Models
3.
If damaged components are found -
DO NOT
•
Fix, straighten, or heat treat any part of a Safety Clamp.
•
Modify, weld, or change the clamp body or parts in any
way.
Do
•
Replace any worn and/or damaged parts with genuine
Safety Clamps parts.
•
If in doubt about the condition of your clamp, Safety
Clamps, Inc. will inspect and repair your Safety Clamp
for a nominal charge.
WARNING
Safety Clamps, Inc. uses materials which are of strength and
hardness in excess of those used by many competitor clamp
manufacturers. Using parts other than those provided by Safety
Clamps, Inc. could cause the clamp to operate improperly, or
reduce the strength of the clamp to below the clamps specified
operating limits.
ASSEMBLY
To reassemble the VL-BC model
and VBC model
Safety Clamp:
1.
Refer to the clamp diagram (Fig. 1) and reverse the
disassembly process described on the previous pages.
2.
Check that all roll pins are securely in place.
3.
Lubricate all moving parts.
4.
Make sure the clamp functions properly and that parts move
freely without binding.
12
Summary of Contents for VL-BC
Page 15: ...Notes ...
