Safety Clamps VL-BC, Operation, Maintenance, And Repair Manual

Page: 10 / 16

Figure 5 Figure 6
HOW TO USE THE VL-BC MODEL and
VBC MODEL SAFETY CLAMPS
1. Prior to use inspect the clamp in accordance with procedures
provided under the section titled "Before Use Inspection" in this
manual.
2. For the VL-BC model, open the clamp by releasing the lock handle
down (A, Fig. 5), and pushing shackle (B) down until the lock
engages and the gripping cams (C) are in the raised position clear
of the jaw opening.
3. For the VBC model, open the clamp by pushing down the shackle
(B) until the gripping cams (C) are in the raised position clear of the
jaw opening. Hold the clamp in this position until clamp is loaded
onto the material.
4. Place the jaw of the clamp fully onto the material with the leaving
1/8" to 1/4" clearance between the material and the back of the jaw.
5. Make sure the clamp is positioned so the gripping surfaces are in
full contact with the material. Center the clamp so the load is
balanced when lifted.
Safety Clamps, Inc. VL-BC, VBC Models
8