Safety Clamps, Inc.
VL-BC, VBC Models
11
DISASSEMBLY
2.
To disassemble the
model
VL-BC
and
model
VBC
Safety Clamp:
a)
Remove roll pins from the SC-54 pin and SC-37 pin
(Fig. 1), and
remove the SC-54 and SC-37 pins from the body.
b)
For the VL-BC model, r
emove the roll pins from the lock
assembly SC-65 (Fig. 1).
Pull the handle out and remove the
lock (SC-65) and spring
(SC-6
1,
Fig. 1).
c)
For the model VL-BC
and model VBC
with a 1 ton rated lift
capacity, remove the
SC-35 pin and SC-50 gripping cam
assembly.
For the 2 ton and 4 ton rated lift capacities, remove
the SC-35 pin,
SC-44 pin, and SC-42 gripping cams.
d)
Grip the lifting shackle SC-10 (Fig. 1) and pull inside assembly
out
the back of the clamp.
e)
Remove the remaining pins from the inside assembly and
separate
the remaining parts.
REPAIR
1.
Clean all parts to ensure they are free of dirt, and excess or
gummed
lubricants.
2. Inspect the clamp components in accordance with instructions
contained under the "Monthly Inspections" section of this manual.
WARNING
•
Do not use any blasting or heating method to clean parts.
Summary of Contents for VL-BC
Page 15: ...Notes ...
