For more help and resources, call 1-800-544-1108 or visit www.safety1st.com
9
8
Getting Started
Getting Started
Resetting the Camera:
•
If your Camera is moved from one router to another (home to
office), then the Camera must be reset again. And reset again
for Wi-Fi devices (Android or iOS smart devices).
1. Power
Off
the
Camera.
2. Press and hold the Reset Button (underside of Camera).
3. Power On the Camera.
4. Keep pressing the Reset Button until you hear a beep sound.
5. Release the Reset Button and wait for the Camera to complete
the internal reset procedure.
6. After about 1 minute, two short beeps will be heard and the
red LED starts blinking.
• It may take a few minutes until your Camera appears in your
Wi-Fi devices list, or is added to your account. Please be patient.
• The Camera view will be displayed automatically one the
Camera has been added.
Status of LED Indication (Red LED):
Reset / Setup status
fast blinking
Unconnect status
slow blinking
Connect status
solid red / no blinking
Getting Started Online with Wi-Fi devices
(Android or iOS smart devices):
• Using your device browser, go to www.safety1st.com
to download and install the Safety1st App.
• Turn on the Wi-Fi of your device and select your
wireless
network.
• Power on the Camera (see Camera Set-up and
Resetting the Camera sections (pages 6 & 8).
• After downloading the Safety1st App,
the Account Setup screen appears.
Create an account: Enter a Username,
a Password and e-mail address. Agree
with the Terms of Use and tap “Submit”.
NOTE: All fields are required to be filled
in and Terms of Use must be accepted
to
proceed.
• Login into account. Follow the
on-screen instructions, select the
Wi-Fi connection, and select the
Camera from the list.
• Successful connection goes to Live Feed
of activated Camera on screen.
• Wait up to 5 minutes for a successful connection. Should the
connection process take longer, logout and try again.
• Ensure that you have a good Wi-Fi network connection
on your device.