![background image](http://html.mh-extra.com/html/safety-1st/continuum/continuum_instructions-manual_798821009.webp)
Securing Child in Child Restraint
11
11.
From the Back, Pull
Harness Straps Through
Shell
Harness straps
MUST
be in shoulder
harness slots
BELOW
the metal bar as
shown.
DO NOT
twist harness straps.
12.
Attach 2nd Harness Strap
Loops to Splitter Plate As
Shown
Sewn ends of the harness strap loops
MUST
face towards you.
DO NOT
twist harness straps or harness
adjustment strap.
Make sure the
same
harness strap
loops are fitted
COMPLETELY ON
both
sides of the splitter plate.
Replace headrest pad around bottom
of headrest.
sewn
end
12
1.
Place Child in Child
Restraint
The child’s bottom and back should
be flat against the child restraint.
Position harness strap over child’s
shoulders and thighs.
3.
Close Chest Clip
Insert right half of chest clip into
left half and snap together.
2.
Buckle Harness
Push buckle tongues into buckle
until you hear them “click.”
Pull up on harness strap to make
sure buckle is locked.
4.
Tighten Harness
Pull on harness adjustment strap
to tighten harness snugly.
continued on next page
Correct
WARNINGS:
Harness system must be installed correctly.
The harness strap must be returned to the upper shoulder
harness slots as your child grows.
Failure to follow these steps can result in serious injury or
death.
10.
Pull Bottom of Headrest
Pad Off of Headrest
Thread harness straps through slots in
headrest pad.
Thread harness straps through lower
shoulder harness slots in headrest and
through the slots in seat back (shell).
4358-6840 Continuum.indd 17-18
4358-6840 Continuum.indd 17-18
10/16/15 2:46 PM
10/16/15 2:46 PM