C. Basic Use
23
Replace child restraint pad by reversing order. Starting from
bottom of child restraint, slip pad on shell. Pull harness
tightening strap through pad. Make sure pad is under
headrest. Replace lower harness guides. Attach all of the
elastic straps. Rethread harness (see section C-8).
Do not use child restraint without the pad.
Cleaning Pad
If your seat pad has machine washable tag:
Machine wash separately with cold water on a
gentle cycle. Do not use bleach. Tumble dry separately
for 10-12 minutes on low heat. Remove immediately.
If your seat pad does not have machine washable
tag:
Hand wash pad with warm sudsy water, rinse clean and
air dry. Do not use bleach or use other harsh cleaners. Do
not dry clean.
Harness Straps
Spot clean the harness straps.
24
Remove Pad
Adjust backrest to lowest
position. Pull pad off the
top of child restraint and
around headrest.
3.
C-7
Removing Pad for Cleaning
You must remove the harness system to remove the pad from
the shell. See section C-6.
Remove the Elastic
Straps
Release the elastic
straps on the back of
the child restraint.
1.
2.
Remove Harness
Guides
Remove both lower
harness guides
(A)
in
bottom of child restraint
under recline stand.
Push harness guide lip
toward outside of shell
with one hand while
pulling harness guide
from the front with the
other.
Lower Harness Guides
A
DO NOT remove the headrest pad. Spot clean with warm
sudsy water.
