Safety 1st air protect, Instructions Manual, Page: 9 / 18

C.
Basic U
se
13 14
C-4 Reclining the Backrest
Backrest has 2 Positions
Backrest has an upright and
semi-reclined position. The
semi-reclined position is to
be used only to install the
booster seat flush against
the vehicle seat back, if
needed.
1.
To Recline Backrest
Push firmly on the backrest
release tab and rotate top
of seat back about 2.5 cm
(1 in.) The backrest is now
in semi-recline mode.
2.
C-5 Removing Headrest/Backrest
Lay Backrest Flat
To remove backrest/
headrest from seat base,
backrest needs to be in the
most upright position.
Press firmly on backrest
release tab
(1) and rotate
seat back until it lays flat
(2) .
1.
Remove Backrest
Lift backrest hook out of
hole in seat base. Store
backrest for future use.
Lay flap over hole where
backrest connects to the
base.
2.
1
2
4358-5415 Can BoostAir Eng 1/27/11 9:05 AM Page 17