17
18
C.
Basic U
se
Remove Pad from Seat
Base
On the bottom of the base
are pad attachment tabs.
Release the pad from the
tabs. Remove pad
4.
Remove Pad from
Backrest
From the side, pull pad off
of backrest.
5.
Remove Pad from
Headrest
From the back, release the
elastic from the back of the
headrest.
Pull pad off of headrest.
NOTE:
DO NOT REMOVE
the plastic air protect
®
air
bladder system from the
headrest.
6.
Cleaning Pad
Hand wash pad with warm sudsy water, rinse clean and air
dry. Do not use bleach or use other harsh cleaners. Do not
dry clean or machine wash.
NOTE:
Do not wash the pad while still on the booster seat.
Spot clean only if it is not removed.
Install Pad
Replace pad by reversing order. Starting with the headrest, slip
pad over the headrest and air protect system
®
and attach the
elastic straps. Slide backrest pad onto backrest. Make sure
bottom of headrest pad is behind the backrest pad. Lay the
base pad on the base and hook the pad onto the pad
attachment tabs and then slip on the armrest covers.
Do not use this restraint system without the
seat pad. Failure to do this can result in
serious injury.
4358-5415 Can BoostAir Eng 1/27/11 9:05 AM Page 21