Rotate metal retainer, then
insert retainer up through
the shell and pad.
From the top, pull buckle
free from shell and pad.
a.
b.
Insert the buckle’s metal
retainer through the
desired slot.
Make sure that the buckle
is
facing out.
c.
Reach under seat and pull
buckle’s metal retainer
completely through
pad and shell.
d.
14
continued on next page.
Place Child in Child
Restraint
Place the child’s bottom
and back flat against the
child restraint.
This will allow the harness
straps to be properly
tightened.
4.
Check Buckle
Position
Determine which of the
three slots is closest to the
child.
5.
You
MUST
use the 1st or 2nd buckle strap slots
when rear facing.
Any slot can be used for forward facing.
1
2
3
To Change Buckle
Position
Fully recline the child
restraint and locate the
buckle’s metal retainer.
To recline, see section C-5.
6.
13
C. Basic Use