manualshive.com logo in svg

Safety 1st Advance SE 65 air+, Instructions For Use Manual, Page: 27 / 36

Share
Download
Safety 1st Advance SE 65 air+ Instructions For Use Manual Download Page 27

49

 F-1 

Preparing to Install Forward Facing

Lap Belt with 
tether
up to 65 lbs. 
(29 kg)

LATCH Belt 
with tether
up to 40 lbs. 
(18 kg)

Lap/Shoulder 
Belt with 
tether
up to 65 lbs. 
(29 kg)

22-65 lbs (10.1-29 kg) and 29-49 in. (73.6-125 cm) 
and at least 1 Year Old. Forward Facing using 5-point 
harness 

Never place a child less than 1 year old or 
weighing less than 22 lbs (10.1 kg) forward 
facing.

F. Installing Forward Facing

Safety Tip:

Experts agree that children should remain 
rear facing as long as possible. In this child 
restraint, your child can remain rear facing up 
to 40 lbs (18 kg) and up to 40 in (101.6 cm).

The top anchorage strap (tether) is used for the 
forward-facing position only.  

NOTE:

 

We strongly recommend that you use the 

top anchorage strap (tether) in the forward-facing 
position.  If your vehicle does not have an anchor 
bracket, please see your dealer or a qualified 
mechanic and have one installed. The  top anchorage 
strap (tether) can greatly improve the performance of 
this child restraint.

Storage of Top Anchorage Strap (tether):

 

 

When  top anchorage 
strap (tether)  is not 
in use, attach top 
anchorage strap’s hook 
to storage location as 
shown. 

Tighten tether to remove 
the slack.

F-2 

Adjusting  Top Anchorage            

        Strap (Tether)

50

continued on next page.

Summary of Contents for Advance SE 65 air+





































Reviews:

No comments