IN064-01
S15-Angle Head Brazing Gun
Adjust the height of the gun with the
adjustable rod and lock it.
Periodically maintenance of
S4-Angle Head Brazing Gun
B1.Check that all cables and lugs are
tight always twist the plug in to the
outlets on the units
B2. Check that the right pin holder is fitted in the gun.
SAFE No.
For brazing pin
Mark
9211
8-9,5 mm
A
9213
M8 threaded
B
9215
M10 threaded
C
9217
M12 threaded
D
Make sure that pin holder is tight to the gun.
Spanner 8mm and 10mm for 8-9,5 mm and M8 pin holders.
Two paces of spanner 10mm for M10 and M12 pin holders.
If the pinholder isn’t tight a spark can destroy the axle.
The brazing pin should not go too loose in the pin holder, when it does
push together with your fingers. Otherwise you can have a contact fault
or a spark can arise.
