9
8
ѥ
WARNING
To avoid burns, check that the cooker
surroundings have cooled down. Be-
fore cleaning the cooker area, check
that there are no hot items, such as
pots or liquids, around and that all
hobs have cooled off.
4. Wipe the cooker dry with a moist
cloth or paper towel.
ѥ
WARNING
Avoid direct contact of the fire ex-
tinguishing agent with eyes and mu-
cous membranes. If contact occurs,
follow the instructions in the Material
Safety Data Sheet.
⚐
ATTENTION
Use cleaning gloves when handling
the fire extinguishing agent.
The fire extinguishing agent is harm-
less to the environment when dilut-
ed. Please flush the agent down the
drain with at least 10 litres of water.
Rinse the used towels and throw
them away in mixed garbage.
Dry the cooker area carefully, espe-
cially from behind and underneath
the cooker.
5. Air the house thoroughly to ensure
that no fire gases remain inside.
6. Before using the cooker:
ѥ
WARNING
Make sure that the fire extinguishing
agent has not damaged the electrical
safety of the cooker.
ѧ
HINT
You can return the power by pressing
the OK button
❷
. First, turn the hob
switches to the zero position.
7. Please contact Safera product
support to replace the Extinguisher
Unit
Ⓔ
. The indicator light panels
❽
stay constantly lit until the
extinguisher unit has been replaced.
Other safety features are still in use.
8. Make sure that the appliance is
serviced after the fire extinguisher
has been used (see Service).
ѥ
WARNING
Note that the Stove Guard is designed
to start the extinguishing of fire, so you
must call Emergency Services if the
situation so requires, and make sure
the fire has been put out. Ensure that
the situation will not recur.
The Stove Guard may not be able to
extinguish difficult fires. In case of a
cooktop fire, act according to to the
instructions given by the authorities.
Do NOT keep electric appliances
right next to the cooker. The fire ex-
tinguisher agent may cause them to
malfunction. Also, an electric shock
is possible. If an electric appliance
has got covered with the fire extin-
guishing agent, remove it from the
electrical network, and, before use,
make sure it does not cause a elec-
tric shock hazard.
The Stove Guard can only extinguish
the fires on the cooker, not those in
the oven or elsewhere in the kitchen.
4. Maintenance
To ensure continued safe and reliable
operation, please follow the instructions
in this chapter. When the appliance is
in working order and in normal mode,
the indicator light for normal activity
❹
blinks every five seconds.
⚐
ATTENTION
If the light panels
❽
are lit red, the
appliance is faulty. See section Trou-
bleshooting.
4.1 Regular maintenance
Wipe the central unit
Ⓐ
with a cloth
moistened with water or a mild deter-
gent, such as washing up liquid, once
a month. Avoid pressing the appliance
buttons and sensors.
Do the installation check-list accord-
ing to installation manual every three
months.
⚐
ATTENTION
Do not use coarse or abrasive materi-
als to clean the central unit
Ⓐ
or the
control panel
Ⓑ
.
4.2 Service of the Extinguisher
Unit
Ⓔ
The Extinguisher Unit
Ⓔ
needs to be
replaced with a new one after every 5
years. Also after an extinguishing the
Extinguishing Unit must be replaced
and the Stove Guard serviced: please
contact your retailer or the Safera prod-
uct support. The service date is marked
on the bottom of the cooker hood, next
to the central unit
Ⓐ
. The Extinguishing
Unit
Ⓔ
is also marked with its manufac-
turing date.
⚐
ATTENTION
Do not bring a hot dish into contact
with the central unit
Ⓐ
, because it
may cause an extinguishing alarm.
If the flame is a small one which will
die down quickly on its own, the au-
tomatic fire extinguisher is not trig-
gered, as it would be unnecessary.
3.5 Water Leakage
Detector (optional)
Safera Stove Guard can be equipped
with max. four water leakage sensors.
When the sensors get wet for exam-
ple because water drips on them, the
detector will sound an alarm with far-
spaced signals and light panels
❽
are
blinking blue.
When you hear the water leakage alarm:
1. Reset the alarm by pressing the OK
button
❷
.
2. Before continuing, make sure the
power supply for the cooker is
turned off.
3. Find out what caused the alarm and
take care of the water leakage.
4. Clean and dry the sensor
Ⓕ
.
ѧ
HINT
If the sensor is left wet, the appliance
will give another alarm in 8 hours af-
ter signing off the previous one.
