11
10
5. Troubleshooting
If the light panels
❽
are lit red, the appli-
ance is faulty. Press the OK button
❷
to
find out the problem type by the indica-
tor lights:
Light panels
❽
blinks blue:
• Blinks once: Problem with wireless
connection.
• Blinks twice: Problem with power
control unit
Ⓒ
.
• Blinks three times: Power control unit
Ⓒ
over-heating.
Light panels
❽
blinks yellow:
• Blinks once: Probem with sensors
❻
.
• Blinks twice: Problem with sensor
unit
Ⓐ
• Blinks three times: Faulty installation
position of the sensor unit
Ⓐ
: see
remedy on the table below.
Light panels
❽
blinks red:
• Blinks
once
: The service life of the
extinguisher unit
Ⓔ
is full.
Please
contact your vendor or Safera
product support.
.
• Blinks
twice
:
The extinguisher
unit
Ⓔ
or its connection cable is
faulty.
• Blinks
three times
:
The extinguisher
unit
Ⓔ
is empty
.
Light panels
❽
blinks purple:
• Blinks
once
: Connection hub
Ⓕ
is or
its connection cable is faulty.
• Blinks
twice
: Connection hub
Ⓕ
failure
• Blinks
three times
: The power
supply
Ⓓ
is faulty.
Please contact your vendor support if you cannot solve your problem with these
instructions:
Problem
Remedy
Cooker cannot be
switched on
Check whether the child proof lock is active. The lock
stops the use of the cooker. For instructions, see chap-
ter 3.2.
The appliance repeated-
ly gives false (the war-
ning light for cooktop
hazard
❺
is on).
Test the working order according to installation manual
step 6/6.
If the appliance is in working order, but the Stove Guard
gives repeatedly false alarms, you may adjust the alarm
limit of the appliance. See installation manual step 5/6.
The appliance repea-
tedly gives false alarms,
especially when the
oven is in use.
There may have been a mistake in the calibration of the
appliance. See installation manual step 3/6.
The indicator light for
normal activity
❹
does
not blink every five
seconds.
There may be a problem with the power supply
Ⓓ
.
Ensure that the power supply
Ⓓ
is connected correctly
to the wall socket and that the socket has power. If the
problem is not solved, remove the Stove Guard from the
electrical network and contact your vendor.
The appliance repea-
tedly gives out water
leakage alarms.
For instructions, see chapter 3.4.
If the alarms recur, take off the fuses for the cooker and
the oven. Check that the leakage sensors are correctly
connected. Put back the fuses.
The light panels
❽
are lit
purple.
The Stove Guard is waiting for installation. See installa-
tion manual.
