Administrative Tasks
Chapter 3. Configuration
39
Example
This example saves the running configuration and reboots the HA4000:
admin>
copy system:running nvram:config
admin>
reboot
View Configurations
The
show
command displays information about saved and running configurations,
IP addresses, and version numbers. This is helpful when troubleshooting. For
additional
show
commands, see Chapter 5, "Troubleshooting."
At the
admin>
prompt, enter this command:
show <
attribute
>
Table 3-3 lists the attributes available with the
show
command that provide
configuration and version information.
Caution
If you make configuration changes and don’t save them, the running configuration
Note:
will not be the same as the saved configuration.
To view the running configuration, enter the
show system:running
command.
Table 3-3 Show Command Attributes
Attribute
Displays
nvram:config
Details of the saved HA4000 configuration.
system:running
Details of the running HA4000 configuration.
ip addresses
Remote, local, and management port IP addresses.
logging
Event logging status information.
interface
Management interface IP and MAC addresses and other
statistics.
Use the
all
attribute to display statistics for all interfaces:
local, remote, and management.
version
Version information.
date
System date and time.