SAFEGREASE, SAFEOIL, MULTILUBE
ST-1340
13401BEN.doc
27.12.2004 Rev. 1B
1 (19)
CONTROL CENTER ST-1340
1 GENERAL DESCRIPTION
ST-1340 is a microprocessor-based control center for SAFEGREASE, SAFEOIL and
MULTILUBE lubrication systems. The control center can be used for controlling 1 to 4 separate
lubrication channels or systems. ST-1340 controls lubrication according to its settings and it
also saves the lubrication event history onto a CPU-card. It will send an alarm to the system for
possible malfunction immediately.
2 DESIGN
Note
Numbers in brackets are part numbers of drawing 461838A.
ST-1340 control center main switch (pos. 1) is located on the side of the center enclosure. The
enclosure cover has a green LED-signal for power (pos. 2) and a red LED-signal for alarm
(pos. 3). Center control panel (pos. 4) is located on the cover inside the enclosure. Each
channel module (pos. 5) contains the I/O-connections required for controlling one lubrication
channel.
2.1 Control panel
Control panel is used to program the lubrication, to reset alarms and to monitor lubrication
phases.
It has a 4-line x 20-character LCD (4 lines x 20 characters) with four (4) function keys below the
display, 12-key keypad for entering alphanumeric data and a CPU-unit.
CH2 SG2 Machine 1
Interval 012h10min
L1:005bar L2:005bar
Chnl Page Extr Manu
Figure 1.
Display and function keys
