Safeline 1000, Manual, Page: 12 / 16

10
Hisselektronik
www.safeline.se
Dial tone programming
CODE DATA NOTE
Alarm codes
P100 ID code *01* - - - - - - - - # P100 always 8 digits
CPC ID code *02* - - - - - - # CPC 6-8 digits
Q23 ID code *03* - - - - - - - - - - - - # Q23 always 12 digits
Phone number:
1st Phone no.: *11* - - - - - - - - - # Phone no. To alarm receiver 0-16 digits.
2nd Phone no.: *12* - - - - - - - - - # Phone no. To alarm receiver 0-16 digits.
3rd Phone no.: *13* - - - - - - - - - # Phone no. To alarm receiver 0-16 digits.
4th Phone no.: *14* - - - - - - - - - # Phone no. To alarm receiver 0-16 digits.
Alarm type:
Alarm type 1
st
no.: *21* - # Change alarm type 1-4
th
number:
Alarm type 2
nd
no.: *22* - # 0=P100, 1=VOICE, 2=Q23, 3=CPC
Alarm type 3
rd
no.: *23* - #
Alarm type 4
th
no.: *24* - #
Alarm type LMS no.: *30* - # LMS alarm type only CPC/P100
Test alarm/battery alarm:
LMS Phone no.. *16* - - - - - - - - - # LMS phone number.
To alarm receiver / SLCC
Test alarm *17* - - - - - - - - - # Phone number.
To test alarm receiver / SLCC
Days between tests *27* - - # Days between tests.
00-99 days.
Test alarm protocol. *31* - # Protocol test alarm 0 = P100 (SLCC),
3 = CPC
Alarm character :
Alarm character 1
st
no.: *41* - - # Alarm character. Only when CPC is used
Alarm character 2
nd
no.: *42* - - # as alarm protocol normally 10 or 27.
Alarm character 3
rd
no.: *43* - - # Check with your alarm central!
Alarm character 4
th
no.: *44* - - #
Alarm character LMS *45* - - # LMS (Battery alarm) Normally 17
Alarm character Test alarm *46* - - # Test alarm= Normally 26
Number of ring signals. *72* - - # Ring signals before re-dial. (02-50)
Hot Line *75* - # 0 = Standard phone line (standard)
1 = Hot line
Automatic answering *81* - - # Set to 00-16 00=Don’t answer.
(standard = 02)
Unit number . *82* - # 0 (standard) - 9
Dial tone detect *83* - # 0=Off 1=On (standard)
Set to 0 if SafeLine is having problems detecting
the dial tone.
Receipt to SLCC *84* - # 0 = Off (don’t send receipt), 1 = On (send receipt)
Break on new alarm *86* - # 0 = Off 1 = On (standard)
Password *91* - - - - # Change password (standard=0000)
Simulate an alarm event *94* - # Simulates an alarm event.
Note! LMS no. *16* must be programmed.
1 = Emergency alarm.
2 = Test alarm.
5 = Receipt on voice call.
Restore to default: *99* 1 # Restores unit to factory default.
End programming:
End programming. *00# *00# End programming.