8
Hisselektronik
www.safeline.se
To set the internal memory to zero
Step by
step…
The display
shows:
Explanation:
Next to do:
Tip:
Turn on the
power
Handunit for
Safeline 1000/2000
-----------------
Version 1.15
Press ”D” within 3
seconds.
The
display will
automatically
show
Initialising
The internal memory is
set to zero.
This will
automatically
take you to
Step 2.
Step by
step…
The display
shows:
Explanation:
Next to do:
Tip:
Turn on the
power
Handunit for
Safeline 1000/2000
-----------------
Version 1.15
Press ”C” within 3
seconds.
The cable has to be
connected to read the
telephone.
The
display will
automatically
show
****************
Reading from
Safeline
****************
All codes and telephone
number are read from
the telephone.
This will
automatically
take you to
Step 2.
Now you can go through and
check/change all codes and
telephone numbers.
To read all codes and telephone number from an existing telephone:
To change alarm types: Follow the programming to Step 4
Step by
step…
The display
shows:
Explanation:
Next to do:
Tip:
Step 4:
_
TEL.NUMBER 1 =
#=NEXT D=HELP
Press ”B” to change
alarm type.
P100 -- to call alarm
receiver operator.
VOICE -- to call a
standard telephone.
MINICALL -- to call
to leave a code to a
beeper.
Press ”#” to go
to next text
Step 5-7:
Repeat all as above.
Press ”#” to go
to next text
Press ”#” to read out active
alarm type, press “#” again
to change alarm type.
To save press ”#”.
Simplifi ed programming