29
O
N
Removal:
• To remove the tether, press the
tether adjuster button and loosen
the tether strap.
L
Depress the
snap and remove the hook from the
vehicle tether anchor.
M
• Roll or fold excess tether strap
and attach Velcro strip to prevent
tangling.
• To detach LATCH connectors from
the vehicle lower LATCH anchors,
press the red button on each LATCH
connector.
N
Return LATCH
connectors to storage locations on
side of child restraint.
• Fold harness for storage.
O
Installation With Vehicle Seat Belts
(30-60 Pounds, 34” - 52”)
Installation With
Lap-Shoulder Belt
1.
Choose an appropriate vehicle seat
and verify a tether anchor is available.
A
• Refer to vehicle owner’s manual to
determine the exact tether anchor
location.
• If a tether anchor is not available,
do NOT use this child restraint.
WARNING
FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN SERIOUS
INJURY OR DEATH.
• Use this child restraint FORWARD FACING ONLY.
• This child restraint requires the use of the tether. IF a tether anchor is not
available, DO NOT USE this child restraint.
• Read and follow all instructions in the child restraint instruction manual
and the vehicle owner’s manual. In the case of a discrepancy, follow the
instructions in the vehicle owner’s manual.
• See pages 17-20 for important vehicle seat belt requirements.
• Always store LATCH connectors in their storage location on side of child
restraint when not in use.
A
HARNESS
M
OD
E
M
L
28
Installation With LATCH
cont’d.
Summary of Contents for HARNESS
Page 1: ......
