HARNESS
M
OD
E
8.
Secure the tether:
• Secure the tether clip to the vehicle
tether anchor.
H
• Pull free end of tether strap to
tighten and remove any slack.
I
• Check to be sure tether is tight &
secure.
• Tightly roll or fold excess tether
strap, attach the Velcro
®
strip, and
place out of the child’s reach to
avoid a strangulation hazard.
J
H
�����������������
I
���������������������
J
9.
Check for a secure installation:
• Grasp child restraint at rear of arms
as illustrated. Pull forward and side-
to-side on the child restraint.
K
• The installation is secure if the child
restraint does not move more than
1 inch in any direction.
• If the child restraint does not remain
securely attached, repeat steps
1-9 or move the child restraint to
another seating location.
• If possible, move unused vehicle
seat belts out of the child’s reach to
avoid a strangulation hazard.
• Check for a secure installation
before every use of the child
restraint!
K
Installation With LATCH
cont’d.
27
26
After installation is complete, see page 44,
Securing Child in Harness.
Summary of Contents for HARNESS
Page 1: ......
