6
Fault Alarm Handling:
Fault Code
Possible Cause(s)
Solution(s):
1. The whisk is not installed in
the metal cup.
2. The metal cup is not put into
the base.
3. The metal cup is not added
with corresponding solution,
meaning that this product is
heated with nothing; the
solution in the metal cup is
insufficient.
4. Take out the metal cup when
the milk frother is working.
1. The machine is continuously
heated for a long time and
thus the inside of the base
is at high temperature.
2. The cooling hole on the back
of the base is blocked and
thus the inside of the base is
at high temperature.
1. Please mount the whisk correctly onto the shaft
of metal cup.
2. Please put the metal cup correctly into the base.
3. Please pour an appropriate amount of
corresponding solution into the metal cup and it
is not allowed to start the machine without
corresponding solution; it is necessary to add
more than 120ml ( MIN) corresponding solution
and it is recommended to make the mixture as
per the operating instructions..
4. Please put the metal cup in again and start it again
and it is not allowed to take the metal cup out
when the milk frother is working.
1. Pease aoid heating the machine continously for
more than 5 times; please operate the machine
after it cools.
2. Remove the obstacles from the cooling hole on
the back of the base and then operate the
machine after it cools
The voltage is excessively low.
This product goes wrong.
Please contact the customer service personnel.
The voltage is excessively high.
Please apply correct voltage as per the operating
manual.
Please apply correct voltage as per the operating
manual.
E5-E7
E4
E3
E2
E1
The user is required to read the instructions carefully and avoid any wrong operation as much
as possible; if the above solutions fail to solve the problems), be sure not to disassemble the
product by yourself and please contact professional staff to solve the problems).
Tips for Use
The following tips for use can help you make better milk froth:
• Use a foaming whisk to first heat the milk and then make it into milk foam. When this Milk Frother
is working, you need to immediately prepare coffee or hot chocolate.
• This Milk Frother can make frozen milk into milk froth; however, it does not mean that this machine
can make frozen milk into frozen milk froth because the working Milk Frother can generate
certain heat.
• The ideal milk heating temperature is 60-80°C because such temperature can increase the flavor
of coffee while not reducing the taste of coffee and you will not wait too long to drink coffee.
• The whisk is relatively small, so it is necessary to place it in a safe place in order to prevent it from
being lost or prevent a child from eating it by mistake.
• This Milk Frother can be used only for heating or frothing; please do not put coffee beans into
this Milk Frother; please clean and dry it immediately after using it.