
SAFE-AID TS350 WIRED WIND SPEED METER MANUAL - VERSION 1
Page 9
The display buzzer can be overridden (shut-off) by pressing the buzzer symbol if intermediate
or 100% windspeed is reached. Once the symbol has been pressed (
Figure 5
) a red cross
will be placed through the buzzer symbol.
WIND
SPEED
LIMIT
&
UNIT
SETUP
To enter the
Windspeed Limits
setup, press the screen on the wind speed limit value. The
password screen will appear and a password will be requested (
Figure 6
). Enter the three-
digit password
[___7___]
[___9___]
[___2___]
followed by the
Enter
key. The
Windspeed
Limits
screen will now be displayed (
Figure 7
).
Select the required units by pressing
Wind Speed Units
. Wind Speed Units will now be
highlighted blue and by pressing the select button the units will change. Each time the
Select
button is pressed the units will change sequentially as follows:
kts
-
Knots
mph
-
Miles per hour
km/h
-
Kilometers per hour
m/s
-
Meters per second
Figure 6
Figure 7
Once the correct units have been selected, highlight the desired limit and use the keypad to
enter the Intermediate (
Figure 8
) and Upper (
Figure 9
) wind speed limits. The system has a
pre-programmed conversion formula so the limits can be set in one unit of measure but shown
in another with no calculations needed by the operator. This can be done by just selecting
the correct unit, inputting the desired limits and then changing the units to the required units
to be displayed.
Figure 8
Figure 9