SAFE-AID TS350 WIRED WIND SPEED METER MANUAL - VERSION 1
Page 17
Figure 32
Figure 33
The application will now install and a progress bar will be displayed (
Figure 32
), once
complete the Installation screen will be displayed (
Figure 33
). Click Finish to complete
installation and exit the Windspeed Logger Setup installation.
Once the
ccWindSpeedLog
program is installed open the program on the PC using the
shortcut on the desktop, remove the USB flash drive from the TS350 display unit and insert
the USB flash drive into the PC.
Any software problems contact your authorized distributor or email the factory at:
BASICS
OF
THE
PC
LOGGING
SOFTWARE
‐
ccWINDSPEEDLOG
All the data stored on the USB flash drive can be downloaded and stored directly from the
USB flash drive onto the PC using the ccWindSpeedLog software.
The following functions can be done or viewed with the ccWindSpeedLog application:
Backup DataFile on Read - Download & backup windspeed data from USB flash drive
Delete DataFile on Read - Download & delete windspeed data from USB flash drive
Unit Register- Create a crane register with TS350 display serial number and a crane
identification or serial number therefore allowing multiple cranes data to be stored in
one place
Delete event data from data base (date selection)
Number of logged data entries – Viewed on the screen
Printing of reports by data entry date – user selectable with a start date and an end
date.
