Safe SafeGate Wood Pressure Fit SC531, User Manual

Page: 10 / 76

10
SAFE SecureHold™ Adhesive is instantly
strong. It cannot be repositioned when placed
incorrectly so test
steps 9-11 first, without
exposing the adhesive. Clean and thoroughly
dry the flat side of each
of the Wall Cups, and the sections of your wall/
door frame where the Wall Cups will attach
with a 50:50 solution of water plus either
white vinegar or surgical spirit.
Laying the Gate across the opening, so that
the 2 bottom Wall Cups are in contact with
the floor, remove the protective layer on the 2
lower Adhesive Pads then tighten the Nuts on
the Bottom Spindles so that they push the Wall
Cups firmly onto the wall, using the Spanner (I)
if necessary.
Ensuring that the Spindles are still fully inser-
ted into the side of the Gate, and with the Wall
Cups clipped onto the Spindle head, remove
the protective layer on one side of each of the
Adhesive Pads (M) and press firmly onto the
flat side of each Wall Cup for 30 seconds.
Hold the Gate vertical, and position the Magne-
tic Spirit Level (J) onto the metal on first one,
then the other side of the Gate. Ensure that
the bubble inside the Magnetic Spirit Level
is centered and the Gate is vertical, before
moving on to Step
11B .
Option B: Adhesive Installation of Wall Cups to Wood
7 B
9 B 10 B
8 B
UK