Safe SafeGate Wood Pressure Fit SC531, User Manual

Page: 7 / 76

7
Step by step installation guide
Slide the Spindle Housings (B) into the bottom
bar of the Gate (A). The AccuFit™ Spindle Hou-
sing (with the red flash) slides into the locking
side of the Gate, and the other Spindle Housing
into the hinge side.
If you need to use Extensions
(see page 4)
, sli-
de them into the holes on the side of the Gate.
The Short Gate Extension (C) fits into the hinge
side of the Gate, and the Long Gate Extension
(D) into the locking side. The single metal prong
slides into the lower of the 2 holes found at the
top of the Gate.
Spin the Tensioning Wheels of the Top Spindles
(E) until the smooth side (without the 4 small
pins) rests against the head of the Spindle.
Slide them into the upper of the 2 holes at the
top of the Gate (or Gate Extension if used). Spin the Nuts of the Bottom Spindles (F) until
they rest against the head of the Spindle. Slide
one into each of the Spindle Housings (or Gate
Extensions if used) found at the base of the
Gate.
Click the Wall Cups (G) onto the ends of the Top
and Bottom Spindles.
UK