SAFE HOME KD 101LB, Manual

Page: 2 / 20

www.safehome.dk
Mounting
Turn the mounting plate (7) of the cabinet (1) by holding the cabinet and turn mount-
ing plate in counterclockwise direction to release the retainers.
Fix the mounting plate in the roof with the screws provided, or fix with other screws
suitable for the ceiling material.
First Use
Insert a 9 V battery in the battery compartment (8) for the smoke sensor and 3 pcs. 1.5
V AA batteries into the battery compartment (9) for the transmitter.
Turn the cabinet onto the mounting plate.
Press the test button (4), and hold. The alarm will be activated after a few seconds and
stop again when the button is released.
When the smoke alarm is working properly, the red LED (3) will flash app. every 40
seconds.
Replacing the batteries
When the battery is running low, the alarm will emit a loud sound.
If the 9 V battery is running low, the tone is heard app. every 40 seconds, if the 1.5 V
batteries are running low, the tone is heard every minute. Always replace all three 1.5
V batteries simultaneously.
After replacing the batteries, test the alarm by pressing the test button (4).
It is usually not necessary to reprogram the alarm if it is programmed to link with
other smoke alarms - it is recommended to test if all alarms sound when test button is
activated.
Link multiple alarms
1. Choose one of the alarms to be the main unit. Press the LEARN button (5) until
LEARN diode (6) lights green.
2. On all other alarms, press several times on the LEARN button until LEARN diode (6)
turns red.
3. Press the TEST button (4) on the main unit to send signals and link to the additional
units. When the signal is send the ALARM LED (3) will flash red and the main unit
makes a loud noise. The other alarms will accept linking by also making sounds.
4. Now hold the TEST button (4) down to one of the other alarms to ensure that the
main unit sounds when it receives a signal from the other alarms.
Cleaning and Maintenance
The cabinet can be wiped with a damp cloth or vacuuming.