background image

 

1

 
 
 

 

 

 
 

 

Table of Contents..………..……………..….1 
 
What’s included……………………….…….2 

 

Install points to remember…………………2 
 
Features………………………………….….2 
 
Options……………………………………....2 
 
Programmable Features…….……………...2 
 
Programming Transmitter……...………….3 
 
Multi-Car Operation..………………. .. .….3 
 
Remote starter & alarm Valet Mode.…….. 3 
 
Enabling/Disabling Alarm Valet Mode…...3 
 
Enabling Starter Valet Mode………………3 
 
Disabling Starter Valet Mode………..…….3 
 
 
 
 

Tach Adjustment……….………………….…..4 
 
Manual Tach adjustment……….…….………4 
 
Custom Programming Options…..….…….…4 
 
Tach watch Lockout……………………..……5 
 
Idle Mode………………………………….…..6 
 
Diesel Engine.…………………….…………...6 
 
Module Reset…………..……………….……..6 
 
Programmable 5

th

 relay……………………….6 

 
Parking lights Flash Diagnostics……………...7 
 
Harness Description……………………….….7 
 
Harness Description (Cont)…..…..….……….8 
 
Wiring Schematic………….…..…….….……..9 

POLARSTART 

PS-5500/5503/5504/5505/5514  SH 

 Automatic transmission remote starter & full-featured 

alarm system

NOTICE:  

DUE TO THE POTENTIAL FOR DAMAGE TO THE VEHICLE, THE MANUFACTURER IS NOT 
RESPONSIBLE FOR ANY ELECTRICAL DAMAGE TO THE VEHICLE OR TO THE UNIT THAT HAS
CAUSED VEHICLE DAMAGE DUE TO IMPROPER INSTALLATION OF THE PRODUCT.   
THIS UNIT MUST BE INSTALLED BY AN AUTHORIZED POLARSTART TRAINED TECHNICIAN 
USING ALL SAFETY DEVICES SUPPLIED.  
Please review the installation guide carefully before any work begins. 

WARNING

 

THIS UNIT IS FOR AUTOMATIC TRANSMISSION ONLY, BEFORE INSTALLING THE 
UNIT TEST THAT THE VEHICLE WILL NOT START IF THE GEAR SELECT LEVER IS 
IN A DRIVE POSITION.  IF IT STARTS IN GEAR, INSTALL A MANUAL TRANSMISSION 
CAR STARTER.  

Rev: 2.10 La – Dec/05/01 Manufactured in Canada by POLARSTART 

INSTALLATION GUIDE

Table of Contents

Summary of Contents for PS-5500










Reviews: