Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
5
CON-8505
ASSEMBL
Y INSTR
UCTIONS– GEN 1/GEN 4 CONDUIT CARRIER
Varies
Even
Even
1
1
3.6
Torque to 80 in-lbs
3.5
Center the front and rear of the Conduit Carrier evenly between
the Left and Right Rotations. Position the back end of the
Conduit Carrier according to your rack model, but no further
back than the end of the Drive Shaft.
GEN4 CONDUIT MOUNTING KIT
INSTALLATION SEQUENCE
NOTE: Ladder Rack and Conduit Carrier is
shown for illustrative purposes only, and is
not included with this Conduit Mounting Kit.
This Conduit Mounting Kit contains only the
parts needed to repair, replace, or add one
Conduit Carrier.
NOTE: A minimum of 7.00” is required
between the Uppers, and on the Crossbar’s
top, so measure to ensure there will be no
Rotation interference.
Summary of Contents for PRIME DESIGN CON8505
Page 10: ...Page Intentionally Left Blank ...
Page 11: ...Page Intentionally Left Blank ...
Page 12: ...USAM CON8505 US01 Rev D 0818 ...
