Safe Fleet PRIME DESIGN CON8505, Quick Start Manual

Page: 8 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
8
CON-8505
ASSEMBL
Y INSTR
UCTIONS–ALURA
CK/LO
W PROFILE CARRIERS
Flush
Varies
Varies
1
1
LOW PROFILE MOUNTING KIT
INSTALLATION SEQUENCE
1.5
Torque to 80 in-lbs
1.4
Position the Conduit Carrier anywhere between the side rails
ensuring the Conduit Mountings to not interfere with the
AluRack Mounting Brackets attaching the rack to the vehicle
roof. The Conduit Carrier must not exceed the rear most end
of the AluRack side rail.
NOTE: Ladder Rack and Conduit Carrier is
shown for illustrative purposes only, and is
not included with this Conduit Mounting Kit.
This Conduit Mounting Kit contains only the
parts needed to repair, replace, or add one
Conduit Carrier.
NOTE: A minimum of 7.00” is required
between the Uppers, and on the Crossbar’s
top, so measure to ensure there will be no
Rotation interference.