Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
7
A
CX
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE CLAMP DO
WN
Holes aligned
2.7
Torque Lock Bracket
Bolt to 80 in-lbs
3.1
Loosen, but do not remove, the indicated
bolts on the Front Ladder Assembly
3.2
After determining Front to Rear Ladder Hook spacing
based upon ladder size, slide the Front Hook Assembly
under the Crossbars to that determined distance.
2.6
Align the hole on the Lock Bracket to the
lock hole on the Handle as shown below
FRONT HOOK ASSEMBLY
SEE QUICK START GUIDE FOR ADJUSTMENTS
Loosen Bolts
