Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
A
CX
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE CLAMP DO
WN
1.8
Torque the indicated Clamp
Bracket Nuts to 120 in-lbs.
1.5
For maximum Handle distance from
the vehicle, position the Gas Spring
Clamp firmly against the Side Rail
as shown in Figure A
Fig. A
1.6
Position the Rear Clamp Support
onto the Clamp Rod, then into
the Crossbar groove
1.7
Position the Rear Clamp
support firmly against the
Rear Ladder Hook Bracket
1.4
Position the Clamp into
the bottom groove on
the AluRack Crossbar
Support this end
until Step 1.6
