Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
3
1
2
A
CX
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE CLAMP DO
WN
REAR QUICK CLAMP
SEE QUICK START GUIDE FOR ADJUSTMENTS
1.1
Slide the Rear Hook upward
as far as it will go
RIGHT ACX ASSEMBLY SEQUENCE
This ACX Left Hand Quick Clamp Assembly is shown
installed onto a Prime Design AluRack
for illustrative purposes only.
1.2
Finger-tighten nuts
to hold the Rear
Hook in place.
1.3
Loosen this clamp,
but do not remove
the nut or washer.
Installer Note: Alternative Instructions in this
manual are for Prime Design Alurack for Ford
Transit Connect, due to differing positions in
Channel Mounts.
