SafeTrack – Hardware Installation Guide
5
3 INSTALLING THE SAFETRACK HUB
SafeTrack Hub
SafeTrack Hub Bottom View
Mount Hole
Mount Hole
Mount Hole
Mount Hole
Mount Hole
Mount Hole
Mount Hole
Mount Hole
SafeTrack Hub Side View (Service
Access Plate Side)
Service Panel
Access Plate
HUB Wiring Harness
Power, IO, CAN,
(opt. USB)
The Hub has 4 mounting holes on its base plates.
1. Find an interior location that allows for easy access to battery direct
power, ignition signal, a clean ground, and running antenna wires
to the roof mounted antenna.
2. Where there is sufficient area and height clearance to place
the Hub
3. Where holes can be drilled without causing damage to the vehicle
or other devices.
3.1 Mount Recommendations
It is recommended that the Hub be mounted
1. The access plate can be easily accessed for removal for service
and maintenance (e.g. for adding removing storage card, adding
removing SIM cards, access to diagnostics ports)
2. Such that if the Hub attached antenna used, the antenna is vertical
(pointing upward). We highly recommend the roof mounted
antenna.
