Installation
Step 1
Connect the tubes(H) together to get desired length
and screw the bottom end to the ring nut(I) on top of
2 / 3
and screw the bottom end to the ring nut(I) on top of
main fixture, and the top end into the coupling
beneath the canopy(G).Separate the mounting
bracket from the Canopy(G) by unscrewing the
screwed ball anti-clockwise.
Step 2
Unpack all parts from cartons carefully.
1. Fix the mounting bracket(B) to the outlet
1. Fix the mounting bracket(B) to the outlet
box with machine screw(C).
Attach the Canopy(G) to the Mounting bracket
(B) and fix it by turning the screwed ball (E).
Step 3 Wire connection
Make wire connections, with wire connectors(D), following the reference chart listed below.
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor
Insulated Wire(not green)with Silver metal conductor
Black
White
*Parallel Cord(round&smooth)
*Parallel Cord(square&ridged)
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
2 / 3
