Copyright Safari Automotive Pty Ltd Melbourne Victoria Australia – www.safarisnorkel.com.au
Page 4 of 5
11. Secure the inner duct to the snorkel body using S/T screw (Item 7), ensure
the inner duct is hard up against the shoulder on the snorkel body snout
before securing to the snorkel body.
12. Drill a 5mm hole between the first and second internal ribs of the air cleaner
housing 55mm down from the air filter element recess.
13. Position the hose and hose clamps onto the inner duct, install the air
cleaner housing to the vehicle, with the air cleaner housing correctly
fastened, install the air cleaner entry duct. With the air cleaner entry duct
correctly positioned, mark the hole position through the air cleaner housing
onto the air cleaner entry duct side pad. Remove air cleaner entry duct and
air cleaner housing.
14. Drill the marked hole position to 5mm. Apply Sikaflex adhesive sealant to
the pad, apply Sikaflex adhesive sealant to the air cleaner entry duct and
the air cleaner housing inlet, secure the air cleaner entry duct to the air
cleaner housing using pop rivet (Item 18), ensuring a watertight connection
between the air cleaner entry duct and air cleaner housing is achieved,
applying more sealant if required or removing any excess sealant to ensure
a neat job.
15. Install the air cleaner housing to the air cleaner housing mounting bracket
and fasten, with the hose and hose clamps correctly positioned, fasten the
hose clamps to complete the connection of the inner duct to the air cleaner
entry duct.
16. Re-install air cleaner element, air cleaner lid and secure, re-install the
headlight and grille, re-install side indicator and re-connect loom, check
operation of the headlight and side indicator, before installing the inner
guard liner.
17. Install the air ram assembly to the snorkel body and fasten clamp.
N.B: It is the installer’s responsibility to ensure that all connections are
watertight.
