User Guide
“CFOL Series”, User Guide
© SAF Tehnika A/S 2009
5
1.1.1 System
Product name - displays the product name.
Link name - displays the link name which is used to identify the point-to-point unit on
the network.
Link location - displays the link location, which is used to identify the point-to-point unit
on the network.
Latitude - displays the latitude coordinates of the device.
Longitude - displays the longitude coordinates of the device.
Firmware version - displays the device hardware version.
Uptime - displays the time, expressed in days, hours and minutes since the system was
last rebooted.
Average load - displays the average load of the device processor in the period of the
last 1 minute, 5 minutes and 15 minutes (a larger value means a larger average load on
the processor).
<1.0 - System is idle
=1.0 - Normal load
>1.0 - Processor is busy.
Total memory, kB - displays total system memory.
Free memory, kB- displays free system memory.
System time - displays current system time.
License status - displays a status of the current license.
1.1.2 Network
Ethernet link status - displays the status of the Ethernet link. A State
UP
indicates that
the Ethernet link is established. A state
DOWN
indicates that the Ethernet link is not
established.
Ethernet speed/duplex - displays the negotiated speed and duplex of the Ethernet
interface specified in Mbps. The N/A will be displayed if the Ethernet status is down. Full
duplex means that data can be transmitted in both directions on a signal carrier at the
same time. Half duplex means that data can be transmitted in both directions on a signal
carrier, but not at the same time. Auto means that the system will detect link speed and
duplex mode automatically.
MAC address - displays MAC address of the device.
Local IP - displays IP address of the local unit.
Remote IP - displays IP address of the remote unit. The N/A will be displayed if there is
no point-to-point link established.