User Guide
Backup server - specify the backup host IP address or hostname where syslog
messages will be send to.
Backup port - specify the port to which syslog messages will be forwarded [0-65535].
Default: 514.
2.3.5 OLED
Control
(!) OLED control settings are available for point-to-point units with OLED display only.
The OLED display can be enabled or disabled using this control. We recommend to
disable OLED after establishing point-to-point link to prevent undesirable users from
using and configuring point-to-point unit by OLED.
Enable OLED - select to enable, or deselect to disable OLED control for users.
2.4 Service
2.4.1 SNMP
Configuration
SNMP is the standard protocol that is widely used for network management over the
Internet. With the SNMP service enabled, the point-to-point unit can act as SNMP agent.
(!) To communicate with SNMP manager you must configure SNMP communities and
identifiers on both ends (manager and agent).
Enable SNMP - specify the SNMP service status.
Name - displays an administratively assigned name. This
System location - specify the physical location of the point-to-point unit [string].
“CFOL Series”, User Guide
© SAF Tehnika A/S 2009
18