Saf-Fro DVU W500, Instruction For Operation And Maintenance

Page: 6 / 165

EN
5
2 - SETTING UP
2.1. PRECAUTIONS

To protect the front projections, hold closed the transparent cover.

Ensure not to pinch the cables and gas pipes and water

Ensure correct installation of power connections. The quarter turn connection must be well tightened

Do not leave, liquid, hot material in contact with the cables.

The stability of the system is supported up to angles of 10 °.

When slinging wire feeder, do not use ecological spool.

The connection of the wire feeder unit is to made while the generator is off.
2.2. ASSEMBLY OF OPTIONS
Before connecting the wire feeder, the following options have to be assembled :
Trolley option
Liter flow option
Pivot support option
Push pull option
2.3. WIRE FEED UNIT CONNECTION
For the wire feeder and connection options, follow the instructions of the quick start .
P1
Euro-connection MIG & TIG -
P2
Connection MMA
P3
Remote plug
P4
Push Pull plug option
P5
Torch water connections
Any connection or disconnection of the wire feeder on the installation has to be done when the installation is switched off.
P1
P2
P3
P4
P5