Saey GUSTAV, Installation And User Manual

Page: 37 / 52

S
AEY
GUSTAV
10112011
– V01
37
ENGLISH
6 I
NSTALLATION
All local regulations, including those referring to national and European standards need to be complied with when
installing the appliance.
Only an appliance connected by a qualified installer guarantees compliance with legislation on construction and fire
prevention. This is certainly required for safe and proper use of the stove.
Positioning
The appliance shall be erected on floors with an adequate loadbearing capacity (see technical data). If an existing
construction doesn’t meet this prerequisite, suitable measures shall be taken to achieve it.
Adjust if necessary the feet of the appliance to position it at level. The adjustments can be made using a flat spanner
size 13.
Chimney and flue pipes
The stove can be connected directly to the chimney. The diameter of the flue pipe must match the
diameter of the flue outlet of the appliance.
We guarantee the proper functioning of the appliance if the
chimney draught is between 12 and 20 Pa. If the chimney draught
is too high, then a damper must be incorporated.
If there isn’t enough chimney draught, then the following measures
can be considered:

Extending the chimney

Improving the insulation of the chimney (less cooling of the
flue gases)

Increasing the supply of combustion air into the space in
which the appliance is installed.

Improving the airtightness of the chimney