SAEVO Sonic Duo, Owner'S Manual

Page: 31 / 68

31
To meet safety standards, do not operate non-medical equipment within the
patient's area.
Outside the patient's area, the presence of non-medical equipment is
acceptable, provided approved and certified equipment is used.
It cannot be possible to connect any component of the system with other
equipment not recommended by the manufacturer.
Use only the equipment in perfect condition and protect yourself, patients
and others against possible dangers.
3.9.EQUIPMENT INSTALLATION
3.9.1.Installation procedure
a. Procedures for hydraulic and pneumatic installation:
• Connect the hose to the air inlet (15) and tighten the nut
1
• Connect the other end of the hose to your air network (80PSI-Maximum) preferably right after
the air inlet in the connection box, using the tee for connection
1
• Connect the power input cable (17).
b. Procedures for electrical installation:
Plug the equipment into the outlet and proceed according to the sequence of operations that follow.
Before connecting the water hose to the appliance, let the water flow for
approximately 5 minutes, for possible cleaning in the hydraulic pipes and check
that the water in the local network does not contain impurities or contaminants.
17
15
1
Only available for models:
Sonic Duo / Sonic Duo Fit