SAEVO Dental Light, Owner'S Manual

Page: 26 / 52

26
5. CLEANING AND DISINFECTION
Before starting the cleaning and disinfection procedure, turn off the main
switch of the equipment to avoid permanent damage.
For your protection, during the equipment cleaning and disinfection process,
use PPE such as disposable gloves and goggles.
Do not spill disinfectant liquid on the equipment.
Do not use organic solvents, for example, thinner, to clean the equipment.
In the event that the development solution is spilled on the panel, clean it
immediately, as these solutions may compromise the equipment's paint.
The cleaning and disinfection process must be performed at each patient change.
When starting the process, check for visible dirt, such as blood or saliva.
For cleaning, use a clean, soft cloth moistened with mild soap and then dry with a clean, soft cloth
or paper towel.
For the disinfection process of the equipment, use disinfectant detergent foam that has active
components based on didecyldimethylammonium chloride.
Apply the disinfectant detergent foam on the surface or on a clean cloth and spread it on the surface
to be treated. Respect the antimicrobial contact time specified by the manufacturer. After application,
allow to dry. Do not rinse.