SAEVO Dental Light, Owner'S Manual

Page: 12 / 52

12
• The equipment must be installed only by authorized technicians.
• The service manual's recommendations regarding the mandatory existence of protective grounding
must be followed.
• Install the equipment in a location where it will not be in contact with humidity, water, plants
and animals.
• Install the equipment in a location where it will not be damaged by pressure, temperature, humidity,
direct sunlight, dust, salts or corrosive products.
• This equipment is not designed for use in the presence of steams from flammable anesthetic
mixtures or nitrous oxide.
• Place any other external devices at least 1.5 meters away from the equipment, so that the patient
cannot touch any other external devices while they are being attended to.
• The recommendations in this manual for EMC should be followed. Communication equipment and
RF generating sources can affect the operation of the equipment.
• Equipment can cause radio interference or interrupt the operation of nearby equipment, making
it necessary to take mitigating measures, such as reorientation, relocation of the equipment or
shielding of the location.
In order to help ensure proper hygiene and protect against infectious diseases, before the first use,
the equipment must be cleaned and disinfected according to the instructions contained in this manual.
• Under no circumstances can the patient operate the equipment.
• The patient must not touch any parts other than those specific for their treatment.
• The equipment must be operated only by qualified health professionals.
• To operate the equipment, operating personnel must:
- Read and understand the user manual
- Be familiar with the basic structure and functions of this equipment.
- Be familiar with the emergency situation protocols for this equipment.
- Be able to recognize irregularities in the operation of the equipment and implement the appropriate
measures, when necessary.
• This equipment was designed according to the electromagnetic compatibility standards, but in
very extreme conditions, it can cause interference with other equipment. Do not use this equipment
in conjunction with other devices that are very sensitive to interference or with devices that create
high electromagnetic disturbances.
• If this product is exposed to water, humidity or foreign substances, turn it off immediately and
contact an Alliage Authorized Service Center.
• In case of damage or defect, do not use the equipment and contact an Alliage Authorized Service
Center.
• Do not use the equipment if any of its compartments or parts are damaged, loose or have been
removed. Contact an Alliage Authorized Service Center and request repair or replacement of any
damaged, loose or removed cabinets or parts of the equipment before using it again.
• Do not touch the equipment or use it if it is being repaired or if the equipment's cabinets have
been removed.
• Do not open or remove any of the equipment's cabinets. No internal parts can be repaired by
the user.
• In case of falling or impact of moving parts causing their breakage, be careful when handling
Before using the equipment
While using the equipment