Saeco Xsmall Sup 033R, Operating Instructions Manual

Page: 7 / 28

• 7 •
English
Coff ee Grinder Adjustment
W a r n i n g ! T h e g r i n d e r
adjustment knob, inside the
coff ee bean hopper, must be turned
only when the grinder is working. Do
not pour ground and/or instant coff ee
into the coff ee bean hopper.
Do not insert any material
other than coff ee beans into
the hopper. The grinder contains
moving parts that may be dangerous.
Therefore, do not insert fi ngers and/
or other objects. Only grind setting
by means of the appropriate key is
permitted. Turn off the machine by
pressing the ON/OFF button and re-
move the plug from the socket before
carrying out any type of operation
inside the coff ee bean hopper. Do not
pour coffee beans when the coffee
grinder is working.
The machine lets you make slight
adjustments to the coff ee grinder to adapt
it to the kind of coff ee used.
This adjustment should be carried out by
adjusting the pin on the inside of the cof-
fee bean hopper; this pin must be pressed
and turned only with the key provided
with the coff ee machine.
Press and turn the pin one notch at a time
and brew 2-3 cups of coff ee; the variation
in grind may only be noticed in this way.
The reference marks inside the coff ee bean
hopper indicate the grind setting. There
are 5 different grind settings to choose
from with the following references:
1 - Coarse Grind
2 - Fine Grind
Adjusting the Brewed Coff ee
The machine allows you to adjust the
amount of brewed coffee according to
your taste and/or the size of your cups.
Each time the “ “ or “ “ buttons
are pressed and released, the machine
brews a pre-set amount of coffee. This
amount may be reprogrammed to your
taste. Each button may be individually
programmed for a specifi c brew setting.
As an example, the following procedure
describes the programming of the button
“
“, which is normally associated with
espresso coff ee.
• Place a cup under the dispensing
spout.
• Press and hold the “ “button; the
“ “ light blinks during this phase.
• Release the “ “ button when the
amount of coffee in the cup reaches
the desired level.
At this point the button “ “ is pro-
grammed; each time it is pressed and
released, the machine will brew the same
amount of coff ee that was just program-
med.
Standby
The machine is designed for energy sa-
ving.
The machine automatically turns off after
60 minutes of inactivity.
Note: During the turning off
phase, the machine performs
a rinse cycle, if a coff ee product has
been brewed.
To turn the machine on again simply press
the ON/OFF button; in this case the ma-
chine will go through the rinse cycle only
if the boiler is cold.
1
1
2
2
Blinking