• 12 •
Light Signals
Causes
Solutions
Steady on
The machine has reached the right temperature and
is now ready:
- For coff ee brewing;
- For hot water dispensing;
- For steam dispensing
Slow blinking
The machine is warming up to brew coffee and
dispense hot water or steam.
Blinking fast
Machine is overheating. Coff ee may not be brewed.
The water must be drained into a container by turning the
selector switch clockwise to the
“
”
position until the green
ready temperature light
“ “
stays constantly on. After that, stop
dispensing water.
Slow blinking
Indicates that the machine is programming the
amount of coff ee to brew (see section “Adjusting the
Brewed Coff ee”).
Steady on
The machine is brewing a double coff ee
Steady on
Low water level.
Fill the water tank with fresh drinking water. After refi lling the water
tank, the indicator light turns off .
Steady on
The coff ee bean hopper is empty.
Fill the hopper with coff ee beans and start the procedure again.
Coff ee grounds drawer full
With the machine turned on, empty the coff ee grounds drawer.
This operation is always required every 8 coff ees dispensed.
If the drawer is emptied before the signal is given the counter
won’t be reset.
Blinking fast
The water circuit is empty.
Fill the tank with fresh drinking water and prime the water circuit as
described in Section “Using the Machine for the First Time”.
Slow blinking
No brew group - No coff ee grounds drawer
Service door open - Knob in WRONG position for
machine operation.
Make sure that all components have been correctly inserted and
closed. The blinking red light will now turn off .
+
Blinking in counter-
clockwise direction (cyclical)
The machine is performing the rinse/self-cleaning
cycle
The machine ends the cycle automatically.
You can interrupt the cycle by pressing either coff ee button.
Alternating
blinking
A fault has occurred in the brew group.
Try again to brew another coff ee.
+
Blinking
simultaneously
A fault has occurred in the machine and hot water,
steam or coff ee cannot be dispensed.
Turn the machine off . After 30-seconds, turn it back on.
Try this 2 or 3 times.
If the machine does NOT start, contact an authorised service centre.
CONTROL PANEL LIGHTS
Summary of Contents for Xsmall Sup 033R
Page 26: ...26...
Page 27: ...27 Portugal...