English
81
located on the upper grinding blade hold-
er and in the hole on the neck of the hop-
per.
• The manufacturer cannot be held responsi-
ble for bodily injury or damage to property
if these regulations are not complied with.
If the coffee grinder is to remain inac-
tive for a long period, clean it careful-
ly, dry the top container and leave it
open.
ATTENTION: Moving parts.
This appliance has been designed solely for
grinding coffee beans. Any other use is under-
stood to be improper, and consequently haz-
ardous. The manufacturer cannot be held
responsible for any damage as a result of
improper or incorrect use.
Do not use the appliance for grinding other
types of food, or anything else.
Do not use the doser (grinder-doser version) to
store foods or measure them.
THE COFFEE GRINDER-DOSERS MANUFAC-
TURED BY OUR COMPANY ARE INTENDED
FOR SKILLED PERSONNEL ONLY FOR PRO-
FESSIONAL USE AND NOT FOR HOUSE-
HOLD USE. The user must be an adult. Do not
allow children or incapable persons to use the
appliance.
The appliance must be installed by skilled
technical personnel in conformity with the safe-
ty rules in force. Incorrect installation may
result in injury of persons or animals, or dam-
age to property, for which the manufacturer
cannot be held responsible.
• The appliance must be placed on a stable,
flat surface.
• Before plugging in the appliance, make
sure the voltage and frequency values of
the supply mains correspond to the ratings
indicated on the label featuring the appli-
ance’s technical data.
• The wall socket must be fitted with an effi-
cient earth contact. Consequently, it is
essential to make sure the earth system is
efficient and in conformity with current safe-
ty rules. If in any doubt, have the system
thoroughly checked by per-sonnel with the
appropriate professional skills.
• IT IS COMPULSORY TO EARTH THE APPLI-
ANCE.
• The manufacturer cannot be held responsi-
ble in the event this regulation is not com-
plied with.
• It is essential to make sure the ratings of the
system are suitable for the power absorbed
by the appliance - as indicated on the
label featuring the technical data - and that
the wall socket is protected against over
currents.
• Do not use extension cables, plug adapters
for multiple sockets or makeshift connec-
tions.
• The motor must rotate clockwise. If the rota-
tion of three-phase motors is to be inverted,
by inverting the two power supply wires
inside the plug, this must be carried out by
skilled personnel.
6 - INS
T
ALLA
T
ION
AND WIRING
5
- USE
Summary of Contents for ULISSE
Page 87: ......
Page 88: ...Cod Ed 01 07...
