Saeco SUP040RB, Operation And Maintenance

Page: 80 / 108

English
9
80
The machine immediately begins the coffee brewing phase.
The "STOP COFFEE" message is displayed.
Press the "Special Beverages" button when the desired
amount of coffee is reached in the cup. Now the
"Cappuccino" button is programmed. Whenever it is
pressed and released, the machine will brew the same
amount that has just been set.
The length of all products
can be programmed with
this
procedure, except
"AMERICAN COFFEE" and
"STEAM".
When the programming procedure has been completed,
enter the programming mode and reset the "SELF
LEARNING" parameter to "OFF", in order to prevent
other users from accidentally changing the quantities.
9.13 Using the Machine with
Credits
This option can be enabled
or disabled by the service
provider.
The machine is designed to manage beverage brewing by
means of a credit system. The number of coffee-based
products brewed is limited to the number of credits
granted by the service provider.
When no credits remain, no more coffee-based products
can be brewed.
Available credits are displayed whenever a product is
brewed.
Hot water, hot milk and
steam dispensing is not
subject to credit; it can
always
be performed,
provided that there is
water in the tank.
Each service provider decides independently how to
manage the granting and recharging of credits to allow the
machine to be used.
9.14 Emptying the Coffee
Grounds Drawer
This section applies only if the
service provider has enabled
the
coffee ground
management option. If the
coffee ground management
option is disabled, this section
does not apply and you should
ask the service provider for
information on how to dispose
of coffee grounds.
This operation must be
performed with the machine
turned on and/or in stand-by
mode.