Pour 1 or 2 doses of ground coffee into the
filter.
Note:
The machine is equipped with a
special filter holder which doesnt require a
filter change to serve a second cup of coffee.
Insert the filter holder into the brew head,
turning from left to right until it locks into
place.Release the handle of the filter
holder. The filter holder will automatically
move slightly to the left. This movement
guaran-tees the perfect operation of the
filter holder.
Rinse the tank with clear water without
using any detergent. Fill in the tank with
fresh water.
Reinsert the tank in its appropriate seat.
An automatic device provides for the
insertion of the suction pipe.
Caution:
The tank must be filled with water
only. Never use milk, sparkling mineral
water or other liquids.
Operation without water may cause
damage to the machine.
3.3 Power supply connection
Be certain the main switch is off before
connecting the machine to the power supply.
Plug the machine into an outlet with
adequate voltage.
3.4 System loading
Before any operation, after the machine
has not been used for a while, and after
emptying the water reservoir and
dispensing steam, the machine system
has to be loaded.
Position the steam dispensing tube above
the drip tray and turn on the hot water/
steam knob until a regular water stream
comes out. Turn the knob off.
4
Coffee dispensing
Turn on the machine by means of the
main switch. Wait until the green LED is
on to indicate that the machine has
reached the proper temperature.
Do not repair or disassemble the machine
on your own. Repair work and service are
reserved to Authorized Service Centres
which use original spare parts and
accessories.
Dont use the machine in rooms where
there are explosive materials. In the case
of a fire, use a carbon dioxide (CO
2
)
based extinguishers. Do not use water or
powder extinguishers.
The original packaging has been devised
and realized to protect the machine during
transportation. We recommend you save
it for any future transportation.
3
Installation
3.1 Main voltage check
The machine voltage has been set at the
factory. Be certain the voltage corresponds
to indications of the data plate on the
machine bottom.
In case an extension cord is used, be
certain it meets or exceeds all safety
standards.
3.2 Water tank filling
Remove the tank from the machine.
20
INSTALLATION
21
COFFE DISPENSING
