2
1
1
1
Press the release buttons on both sides of the top of the milk carafe (1) and
lift the top off the milk carafe (2).
2
Turn the dispensing spout lid upside down and hold it firmly in your hand.
Pull the suction tube off the rubber support.
2
1
3
Press the release buttons on the milk froth dispensing spout and remove the
milk frother from the the rubber support.
4
Pull the milk frother connection out of the milk frother.
5
Rinse all components under a lukewarm tap.
Tip: All detachable parts, except the carafe, can be cleaned in the
dishwasher.
Reassembling the milk carafe
1
To reassemble the milk froth dispensing spout, follow steps 2 to 4 of
'Disassembling the milk froth dispensing spout' in reverse order.
2
Place the milk froth dispensing spout back in the top of the milk carafe.
3
Place the top of the milk carafe back on the milk carafe.
Note: Before you place the milk froth dispensing spout back in the top of the
milk carafe, move the pin inside the top to the correct position. If this pin is not
in the correct position, you cannot place the milk froth dispensing spout back in
the top of the milk carafe.
Monthly cleaning of the milk carafe
Only use SAECO milk circuit cleaner CA6705 for this cleaning cycle.
31
English
