27
Then the machine ready screen appears with the AquaClean 100% icon to
indicate that the filter has been activated.
Manual rinsing cycle
During the manual rinsing cycle, fresh water flows through the water and coffee
brewing circuit. This takes a few minutes.
Coffee brewing circuit rinsing
1
Place a container under the coffee dispensing spout.
GROUND COFFEE
2
Press the AROMA STRENGTH button and select GROUND COFFEE.
Note: Do not add pre-ground coffee in the pre-ground coffee compartment.
3
Press the CAFFÈ CREMA button. The machine starts dispensing water from
the coffee dispensing spout.
4
Wait until the machine stops dispensing water and empty the container.
5
Repeat steps 1 to 4 twice.
Hot water circuit rinsing
1
Insert the hot water dispensing spout and place a container under the hot
water dispensing spout.
HOT WATER
2
Press the MENU/SPECIAL DRINKS button. Select the SPECIAL DRINKS
function and scroll the menu to select the HOT WATER function. Press the
OK button to confirm.
The machine starts dispensing hot water.
3
When the machine stops dispensing, repeat steps 1 to 3 twice.
4
When the machine has returned to the main menu, empty the container.
The machine is ready for use.
AquaClean filter
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of 8 Aquaclean filters as indicated in this user
manual, you don't have to descale your machine for 2 years or 5000 cups (with
a capacity of 100 ml).
Note: Replace the AquaClean filter when the filter icon starts flashing on the
display. Replace the AquaClean filter at least every 3 months, even if the machine
has not yet indicated that replacement is required.
Preparing and installing the AquaClean filter
1
Remove the AquaClean filter from its packaging. Shake the filter for about 5
seconds.
12
English
